4WD Systems has a range of Steel and Alloy Bull bars – designed with strength, durability and attractive looks foremost in mind. The range is computer designed with a list of useful options – equally at home in town or in the bush
A Bull Bar is far more than just a simple protection device for you and your vehicle, it is a purpose built 4WD accessory designed for strength, functionality and stylish good looks for the modern vehicle.
It provides the mounting place for lights, winches and aerials that will withstand animal strikes, impacts with terrain and other vehicles – that would otherwise cause more expensive damage and the inconvenience and disappointment of a ruined holiday.
In particular the light weight design improves your vehicles ground clearance, approach angle and turning circle. There is no compromise in your vehicle’s handling and performance.
Each bar is designed and manufactured to suit the model of vehicle and compliment the original lines and body shape. All steel bars are finished in a high quality long lasting powdercoat.
The computer aided design is the key to all the characteristic benefits of both the Steel & Alloy bar – safety, good looks, strength, light weight, impact resistance, ground clearance and vehicle protection.
The one piece folded & welded bumper design provides light weight structural strength and rigidity, the multiple axis chassis mounting system gives the bar its strength by mounting it to the chassis in all three directions and spreading the load. This type of engineering means reduced weight while maintaining the strength of the old style steel bars of a bygone era. The mounting system is much stronger than the single ‘flat plat’ mounts common to low quality steel and most alloy bars.
The tapered wing and angled bumper sections improve ground clearance, approach angle and turning circles resulting in improved off-road performance as well as having the benefit of an attractive slimline design which further reduces weight.
| Standard Features for Commercial Steel Bar |
| ‘A’ Style has traditional A shaped uprights (when viewed from side on) |
| Air bag compatible |
| Polyurethane cushion to reduce impact |
| Winch compatible |
| Recessed indicator & park lights |
| Computer aided design & manufacture |
| Radius formed tapered wings |
| Fabricated bumper construction |
| Split bumper for greater airflow & greater strength |
| 3-axis chassis mounting system spreads impact & winching loads |
| Hillift jack lifting points adjacent the uprights |
| Mandrel bent tubing |
| Side hoops upright to suit side bars |
| Fully formed aerial & light mounts x2 |
| Complete DIY Kit provided |
| Wide Range to suit many 4WD vehicles |
| High tensile zinc plated nuts, bolts & washers |
| Anti-corrosion preparation for durability |
| High quality powdercoat finish |
| 3 Year Warranty – Unlimited Kms |
| Standard Features for Premium ‘A’ Style Steel Bar & ‘H’ Style Steel Bar |
| ‘A’ Style has traditional A shaped uprights (when viewed from side on) – Commercial & Premium |
| ‘H’ Style has 3 Hoops above the bumper section – the centre Hoop is 76mm, outer hoops are 50mm |
| Fog lights |
| Large Polyurethane cushion to reduce impact |
| Air bag compatible |
| Polyurethane cushion to reduce impact |
| Winch compatible |
| Recessed indicator & park lights |
| Computer aided design & manufacture |
| Radius formed tapered wings |
| Fabricated bumper construction |
| Split bumper for greater airflow & greater strength |
| 3-axis chassis mounting system spreads impact & winching loads |
| Hillift jack lifting points adjacent the uprights |
| Mandrel bent tubing |
| Side hoops upright to suit Brush Bars |
| Fully formed aerial & light mounts x2 |
| Complete DIY Kit provided |
| Wide Range to suit many 4WD vehicles |
| High tensile zinc plated nuts, bolts & washers |
| Anti-corrosion preparation for durability |
| High quality powdercoat finish |
| 3 Year Warranty – Unlimited Kms |
| Standard Features for Premium ‘A’ Style Alloy Bar and ‘H’ Style Alloy Bar |
| ‘A’ Style has traditional A shaped uprights (when viewed from side on) |
| ‘H’ Style has 3 Hoops above the bumper section – the centre Hoop is 76mm, outer hoops are 50mm |
| Highly Polished Alloy |
| Fog lights |
| Large Polyurethane cushion to reduce impact |
| Air bag compatible |
| Winch compatible |
| Recessed indicator & park lights |
| Computer aided design & manufacture |
| Radius formed tapered wings |
| Fabricated bumper construction |
| Split bumper for greater airflow & greater strength |
| 3-axis chassis mounting system spreads impact & winching loads |
| Mandrel bent tubing |
| Side hoops upright to suit Brush Bars |
| Fully formed aerial & light mounts x2 |
| Complete DIY Kit provided |
| Wide Range to suit many 4WD vehicles |
| High tensile zinc plated nuts, bolts & washers |
| 3 Year Warranty – Unlimited Kms |
